Give your thoughts on how the sound is made

[butterprickol]

Thanks for moving the post into the right thread

@Section 8, yes I know that it was used in the mix

@Section 8 @The RaveN, I played a little bit around with dblueglitch and found out that it can be made with using the delaysize in an automation clip (i.e. 11ms to 1ms). But thanks for your suggestions though! Really appreciated it

[butterprickol]

Evening, mates

I'd like to know your thoughts on how these sounds in the mid intro are made:


And how do I resample basses? I've watched a lot of bass resampling videos but the result doesn't fulfill my expectations. How do I create basses like the one at 3:10 - 3:12?


Thanks in advance

[keyboardwarrior]

My Dutch producing brothers I seek out your professional and unmatchable synth and sound design help and that great synth work you know you all posses! I probably off sides many with this post but trust the Dutch when it comes to producing!

How to make the lead sound from 15 seconds in the link posted above and below; do you hear saw waves for that cool lead? what techniques are used as little or as much info you can share about the sound would be appreciated greatly!



Thanks keen to hear any other producers who are not Dutch with an answer to my question is also appreciated!

[The RaveN]

My Dutch producing brothers I seek out your professional and unmatchable synth and sound design help and that great synth work you know you all posses! I probably off sides many with this post but trust the Dutch when it comes to producing!

How to make the lead sound from 15 seconds in the link posted above and below; do you hear saw waves for that cool lead? what techniques are used as little or as much info you can share about the sound would be appreciated greatly!



Thanks keen to hear any other producers who are not Dutch with an answer to my question is also appreciated!

The video isn't available.

[keyboardwarrior]

I have the full track I'll upload it to my sound cloud page now for you to hear thanks man!!!!!

[keyboardwarrior]

My Dutch producing brothers I seek out your professional and unmatchable synth and sound design help and that great synth work you know you all posses! I probably off sides many with this post but trust the Dutch when it comes to producing!

How to make the lead sound from 15 seconds in the link posted above and below; do you hear saw waves for that cool lead? what techniques are used as little or as much info you can share about the sound would be appreciated greatly!



Thanks keen to hear any other producers who are not Dutch with an answer to my question is also appreciated!

The video isn't available.

https://soundcloud.com/thanks_for_liste ... iginal-mix

Fixed, please listen hear and download as a gift for your help with this sound Track below and above

https://soundcloud.com/thanks_for_liste ... iginal-mix

.

[BrorGaben]

For example the 1:31 and 3:24 fx kicks or just any fx kick in the track.

[Valadia]

For example the 1:31 and 3:24 fx kicks or just any fx kick in the track.

What I do most of the times is this.

I eq out all the frequencies I don't want. Also I boost the frequencies that I want to filter in order to get the fx kick. Most of the times that's between 300 - 1100 hz. After you have done that you probably have a very harsh sound.

Spoiler

For the filtering, I like to use Camelphat3. I think the "Lowpass Fat" filter on it works very well for this. First off, clear your preset so you have nothing else going on in your Camelphat. After that, enable the filter section. Put the resonance between 50 and 75%. Open up the Envelope and the Cutoff. You can play with the envelope and cutoff the create the sound you wish. From my experience I call tell you that automating one or both these knobs will create the best sound. In my opinion of course. Another thing that you can do is add some distortion from Camelphat. It can give your fx kick more power.

Spoiler

If you don't have Camelphat, no worries. You can do this with pretty much every filter plugin. Or even with another equalizer. I just think this is the easiest and best way. Hope you undestand it now.

[BrorGaben]

Ty for the reply! But this sadly didnt work out with my kick :/ Here's another example of what kind of kick i am trying to achieve. 4:33

[The RaveN]

Ty for the reply! But this sadly didnt work out with my kick :/ Here's another example of what kind of kick i am trying to achieve. 4:33

Try use quadrafuzz on a reverse bass. Like the "chordrez" preset. PM me if you can't find quadrafuzz yourself.