Kick Topic (Give feedback before posting yours)

[Haz]

Are you removing like.. -0.1db of mid bass? I honesty haven't seen any progression for ages.

[LiamChristopherShenk]

Are you removing like.. -0.1db of mid bass? I honesty haven't seen any progression for ages.

this. seriously JoMaZ, the kick is getting REALLY old.

[Polyzer]

@JMZ
Please start to try something new.

@Atomik:
I'm missing some high mid and high frequencies.

I tried to make something like the NC - Big Bang intro kick cause i really like it:

[Taranta]

@Polyzer Could use some more bass in my opinion and I think u made a different kick. But still nice try

This is what I made:

The synth has some wrong phasing in it but I hope I can get it fixxed later... tell me what you think

[Piro]

@AtomikRevelation the tail is maybe a little to long
still try to remove the midbass I think its getting better:

indeed it is!now just pick a eq and add a notch... if you listen to your ears you will have your good kick, because now you fixed a bit the punch, dont you?

[SourceOfDistortion]

Don't worry- it's easy. Just make up something vague about punch or distortion and aim it @any of the previous 3 or 4 posts. No one will notice.

hahahaha, talk about hitting the nail on the head. This is why this thread is pritty much useless. Those who know how, just want to flex their muscles. No real teaching going on.

[shownback]

Tanks for all of your comments you very help me.

@Jomaz if often I don't write feedback,it because I don't have the level and the experience because I am a beginner so I can't give you correct feedbacks. So sorry..

So thanks for all people.
I thinks people know how to, could teatching (few) because This is the purpose
of this topic.

Sorry for my bad english... Good day...

[hardmusic]

@AtomikRevelation the tail is maybe a little to long
still try to remove the midbass I think its getting better:

Are you using Fl Studio? If you are, add a Parametic EQ 2 on your kick. On the EQ above the freq. meter (dont know how to explain ) are small boxes telling you the name of the ranges of the freqs.

The freqs. you need to drop is low mid. Freq. range 250-450hz. Or maybe even lower 100-450hz.

[JoMaZ]

@AtomikRevelation the tail is maybe a little to long
still try to remove the midbass I think its getting better:

Are you using Fl Studio? If you are, add a Parametic EQ 2 on your kick. On the EQ above the freq. meter (dont know how to explain ) are small boxes telling you the name of the ranges of the freqs.

The freqs. you need to drop is low mid. Freq. range 250-450hz. Or maybe even lower 100-450hz.

tried that with an new dist

[paahhh]

@AtomikRevelation the tail is maybe a little to long
still try to remove the midbass I think its getting better:

Are you using Fl Studio? If you are, add a Parametic EQ 2 on your kick. On the EQ above the freq. meter (dont know how to explain ) are small boxes telling you the name of the ranges of the freqs.

The freqs. you need to drop is low mid. Freq. range 250-450hz. Or maybe even lower 100-450hz.

tried that with an new dist

@JoMaZ
Still kinda sounds the same


heres my kick can't figure out whats wrong with it